This is how I made and added a Huey VA profile and added it to VAICOM Pro.
Keyboard buttons you need to know about in UH-1H Sim control setup:

For Gunner Seat Setup:
- AutoPilot. Category: Cheat Default: LWin + A
- Set Operator Seat. Category: View Cockpit. Default: 2
- Toggle Flexible Sight. Category: Flexible Sight. Default: M
- TrackIR Center button (must be a keyboard button/s)
- TrackIR Pause button (must be a keyboard button/s)
- Armament Selector Down. Category: Armament System. Default: RAlt + [
- Armament Off/Safe/Armed Down. Category: Armament System. Default: RShift + [

For Pilot Seat Setup:
- Set Pilot Seat. Category: View Cockpit. Default: 1
- TrackIR Pause button (must be a keyboard button/s)
- TrackIR Center button (must be a keyboard button/s)
- Armament Selector Up. Category: Armament System. Default: RAlt + ]

1 - Open Voice Attack program.
2 - Create new profile and name it (ex. Huey)
3 - Edit Profile.
4 - New Command
5 - Untick "When I Say" and tick "When I press button" Press the square with three dots and push the hotas button/switch you want to move you to the gunner seat in the huey. Mine is Joystick 1 Button 16.
6 - Push the "Key Press" button
7 - Add all the keyboard buttons in the right order shown above (For gunner seat setup) the command box in VA should look something like this:
Press LWin + A key and hold for 0,5 seconds and release
Press 2 key and hold for 0,5 seconds and release
Press M key and hold for 0,5 seconds and release
and so on.
8 - In the Description box in the "Edit a Command" window type in "Huey Gunner Seat"
9 - Press OK, Apply and Done. You have now created a enter gunnerseat command for the huey.

Now repeat the same for a back to pilot seat command. This time follow the "For Pilot Seat Setup" command order above.
This time set the description to "Huey Pilot Seat" in point 8.

You chould end up with a VA profile called "Huey" with two commands called "Huey Gunner Seat" and Huey Pilot Seat".
Test if this profile works as intended in DCS.

To merge this VA profile into the Vaicom Pro profile do the following.
- Select "Huey" profile and export profile.
- Select Vaicom Pro profile.
- Push "edit a profile" button. The square with a pencile icon.
- Push the "Import Commands" button bottom left and select the huey-Profile.vap click "Open"
- In the "Edit the profile" window find the two commands "Pilot Seat" and "Gunner Seat" Double click one of them to open the "Edit a Command" window.
- Click "Other" - "Advansed" - "Begin a conditional (if statement) block" - "Single condition"
- Select the "Text" tab. Paste this line in to the "Variable Name / Token" box
Copy
{TXT:vaicompro.playerdata.currentmodule.name}

and this line in to the "text" box
Copy
UH-1H
then click OK.
- Back in the "Edit a Command" window the line "Begin Text Compare :[{TXT:vaicompro.playerdata.currentmodule.name" is added together with "End Condition".
- Highlight the "Begin Text Compare :[{TXT:vaicompro.playerdata.currentmodule.name" and move it up to the top with the "Up" button on the right. and make sure the "End Condition" line is at the bottom.

It should look something like this:
Begin Text Compare :[{TXT:vaicompro.playerdata.currentmodule.name
Press LWin + A key and hold for 0,5 seconds and release
Press 2 key and hold for 0,5 seconds and release
Press M key and hold for 0,5 seconds and release
End Condition

- Click OK and do this to both "Huey Gunner Seat" and Huey Pilot Seat" commands.
- Click Apply and Done.

You should now have the huey profile integrated in the VAICOM PRO Profile.

My Huey-Profile.vap is attached to this forum post. You can import it to Voice Attack and edit the keybinds that fits your keyboard settings in DCS.

ANON6 Wolfie